Subject: Re: [netatalk-admins] two port problem
From: Gregor Retti (c60831@germ2.uibk.ac.at)
Date: Tue Sep 02 1997 - 11:15:51 EDT
At 14:24 Uhr +0100 02.09.1997, John Barry -Technician wrote:
>I've just compiled up netatalk-1.4b2+asun2.0a15, and apart from a little
>glitch
>with the des library it worked out just fine.
>However, I'm having problems getting it to run properly on a SPARC station 2
>with 2 network cards.
>in 'discovery' mode I get an atalkd.conf like this:
>
>le0 -phase 2 -net 65280-65534 -addr 65280.32
>le1 -phase 2 -net 65280-65534 -addr 0.0
>
what is connected to the ports? the net 65280-65534 information must come
somewhere from - most proberably a router. but what about le1? if your
sparc is to connect this segment to the rest of the net, you have to
provide some seed-information. I think, that is where the 0.0 comes from ...
greetings
gregor
-----------------------------------------------------------------------
gregor retti ---------------- http://germ2.uibk.ac.at/germ/retti.html
-----------------------------------------------------------------------
This archive was generated by hypermail 2b28 : Sat Dec 18 1999 - 16:26:34 EST