Subject: [netatalk-admins] two port problem
From: John Barry -Technician (John.Barry@tees.ac.uk)
Date: Tue Sep 02 1997 - 09:24:53 EDT
I've just compiled up netatalk-1.4b2+asun2.0a15, and apart from a little glitch
with the des library it worked out just fine.
However, I'm having problems getting it to run properly on a SPARC station 2
with 2 network cards.
in 'discovery' mode I get an atalkd.conf like this:
le0 -phase 2 -net 65280-65534 -addr 65280.32
le1 -phase 2 -net 65280-65534 -addr 0.0
and then I get this:
+ etc/rc.atalk
loading netatalk: module loaded; id = 2
starting appletalk daemons: atalkdnbp_rgstr: Connection timed out
Can't register hector:Workstation@*
nbp_rgstr: Connection timed out
Can't register hector:netatalk@*
nbprgstretc/rc.atalk: 987 Memory fault
papd afpd.
(I got that from sh -x , but at boot I get much the same thing.)
I'm vaguely worried about le1 having an address of 0.0
Ideas?
later
jb
This archive was generated by hypermail 2b28 : Sat Dec 18 1999 - 16:26:34 EST