Subject: Re: helping installing netatalk
From: Charlie Clark (cmclark@umich.edu)
Date: Thu Nov 18 1993 - 18:36:05 EST
On Thu, 18 Nov 1993, studarus wrote:
>
> Hi, I need a little help installing netatalk. I'm
> using SunOS 4.1.2
> When I run getzones it only returns the one zone that I
> have listed in atalkd.conf. And nbplkup doesn't return any info
> other than the one computer netatalk is running on.
>
> Here's my atalkd.conf file:
>
> ifconfig ni0 121.0
> ifconfig lo0 0.0
> ni0 "SIOADM"
> route ni0 lo0
> zone SIOADM
Try using an atalkd.conf file that is as follows:
ni0
And that is it (this is assuming you are using netatalk 1.3bsomething,
not netatalk 1.2.1). If you are using 1.3something the rest of your
network needs to be running AppleTalk Phase 2, and if you are using 1.2.1
the rest of your network needs to be running Phase 1, or you won't see
anything.
> But afterwards I get:
>
> ni0: flags=63<UP,BROADCAST,NOTRAILERS,RUNNING>
> inet 132.239.123.152 netmask ffffffc0 broadcast 132.239.123.128
> ether 0:0:83:1d:0:8a
> ni0: flags=63<UP,BROADCAST,NOTRAILERS,RUNNING>
> inet 132.239.123.152 netmask ffffffc0 broadcast 132.239.123.128
> ether 0:0:83:1d:0:8a
> lo0: flags=49<UP,LOOPBACK,RUNNING>
> inet 127.0.0.1 netmask ff000000
> lo0: flags=49<UP,LOOPBACK,RUNNING>
> inet 127.0.0.1 netmask ff000000
>
> Is this normal?
Yes.
This archive was generated by hypermail 2b28 : Sat Dec 18 1999 - 16:19:56 EST