helping installing netatalk

Subject: helping installing netatalk
From: studarus (jstudaru@sdcc5.UCSD.EDU)
Date: Thu Nov 18 1993 - 18:28:56 EST

• Next message: Charlie Clark: "Re: helping installing netatalk"
• Previous message: Michael Johnson: "Re: pap, pfs, and repreating"
• Next in thread: Charlie Clark: "Re: helping installing netatalk"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

        Hi, I need a little help installing netatalk. I'm
using SunOS 4.1.2
        When I run getzones it only returns the one zone that I
have listed in atalkd.conf. And nbplkup doesn't return any info
other than the one computer netatalk is running on.
        
        Here's my atalkd.conf file:

ifconfig ni0 121.0
ifconfig lo0 0.0
ni0 "SIOADM"
route ni0 lo0
zone SIOADM

        Another quirk: Before I run atalkd ifconfig -a returns:

ni0: flags=63<UP,BROADCAST,NOTRAILERS,RUNNING>
        inet 132.239.123.152 netmask ffffffc0 broadcast 132.239.123.128
        ether 0:0:83:1d:0:8a
lo0: flags=49<UP,LOOPBACK,RUNNING>
        inet 127.0.0.1 netmask ff000000

        But afterwards I get:

ni0: flags=63<UP,BROADCAST,NOTRAILERS,RUNNING>
        inet 132.239.123.152 netmask ffffffc0 broadcast 132.239.123.128
        ether 0:0:83:1d:0:8a
ni0: flags=63<UP,BROADCAST,NOTRAILERS,RUNNING>
        inet 132.239.123.152 netmask ffffffc0 broadcast 132.239.123.128
        ether 0:0:83:1d:0:8a
lo0: flags=49<UP,LOOPBACK,RUNNING>
        inet 127.0.0.1 netmask ff000000
lo0: flags=49<UP,LOOPBACK,RUNNING>
        inet 127.0.0.1 netmask ff000000

        Is this normal?

        Thanks,

                -John
                studarus@ucsd.edu

• Next message: Charlie Clark: "Re: helping installing netatalk"
• Previous message: Michael Johnson: "Re: pap, pfs, and repreating"
• Next in thread: Charlie Clark: "Re: helping installing netatalk"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b28 : Sat Dec 18 1999 - 16:19:56 EST