Subject: Re: netatalk in production environments....(RFC)
From: Marcus Radich (marcus@darena.co.nz)
Date: Wed May 31 2000 - 15:13:25 EDT
On 31/5/2000, Patrik Schindler wrote:
>At 22:43 Uhr +1200 31.05.2000, Marcus Radich wrote:
>
> >if you don't mind the above, get a shiny new speed penguin at a
>full 9.5MB/sec!
>
>This heavily depends on the client. If you all use B/W G3 or faster,
>there you are.
>
>:wq! PoC
Yes, good point. It is relevant to the client, but a client which is
slightly slower on netatalk, will also be slower with NT. Example:
7600/200
10BaseT
WindowsNT 545k/sec
Netatalk 988k/sec
100BaseT
WindowsNT 2.3MB/sec
Netatalk 7.9MB/sec
G4 in the same environment gets 3.2MB/sec with NT and over 9MB/sec
with netatalk.
mrad01
========================================================
"Always ask the question, never assume the answer."
Marcus Radich 1999
========================================================
This archive was generated by hypermail 2b28 : Wed Jan 17 2001 - 14:30:50 EST