Re: Printcap problem... EPSON almost there

Subject: Re: Printcap problem... EPSON almost there
From: John Grieg (grieg.john@hl.telia.no)
Date: Thu May 25 2000 - 10:09:28 EDT

• Next message: Sean Page: "RE: Printcap problem... EPSON almost there"
• Previous message: Patrik Schindler: "How to print via GhostScript (was: SUBSCRIBE)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I have successfylly set up papd.conf with an Epson 3000

 File '/etc/netatalk/papd.conf':

Epson \:EpsonLQ2:op=lp:pr=lp:

This works well from the Mac (I had to disable chech printer before printing),
choosing an AT-Stylus (?) ---> Epson in the Chooser.

( I AM USING EPSONs OWN PRINTER software (NOT A LASERWRITER))

and the linux box sends the job (raw data) to the printer.

There is only one problem -- there is too much "linefeed"
i.e. a red square would print as

red stripe
white stripe
red stripe
white stripe
red stripe

Any ideas

grieg.john@hl.telia.no

• Next message: Sean Page: "RE: Printcap problem... EPSON almost there"
• Previous message: Patrik Schindler: "How to print via GhostScript (was: SUBSCRIBE)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b28 : Wed Jan 17 2001 - 14:30:48 EST