Subject: Problem with Lantronix (as well as Farallon iPrint SL)
From: Rick Cook (rcook@hex.net)
Date: Sun Mar 12 2000 - 00:48:50 EST
---------- on Fri, 10 Mar 2000 00:48:09 -0600 , Rick Cook <rcook@hex.net> said ->
>>
>> I am having some difficulty getting pap to work with my recently "network-enabled"
>> ColorStyleWriter 2500 from a Quadra 605 running Linux 2.2.10. The printer is
>> connected to the net using a Farallon iPrint SL.
>>
Some additional information to add to the mix about this issue. At work, we
have a few devices that are AppleTalk aware. Tektronix Phaser 840 and
Lantronix connected HP 8000.
Using the netatalk suite from SuSE 6.3 on an x86 machine, I can successfully
pap and papstatus to the Tektronix but get no response from an aecho. I
get the opposite results from the Lantronix (the same as with the iPrint SL
at home) an aecho gets a response but pap and papstatus get a connection time out.
Are there additional instructions for connecting to a Lantronix type device
using netatalk?
>>
>> rcook@q605:~$ cat .paprc
>> Kitchen:ColorStyleWriter2400AT
>>
>> rcook@q605:~$ aecho `cat .paprc`
>> 14 bytes from 65280.1: aep_seq=0. time=9. ms
>> 14 bytes from 65280.1: aep_seq=1. time=9. ms
>> 14 bytes from 65280.1: aep_seq=2. time=9. ms
>> 14 bytes from 65280.1: aep_seq=3. time=9. ms
>> 14 bytes from 65280.1: aep_seq=4. time=9. ms
>> 14 bytes from 65280.1: aep_seq=5. time=9. ms
>>
>> ----65280.1 AEP Statistics----
>> 6 packets sent, 6 packets received, 0% packet loss
>> round-trip (ms) min/avg/max = 9/9/9
>>
>>
>> rcook@q605:~$ papstatus -p `cat .paprc`
>> atp_rresp: Connection timed out
>>
>> Thanks,
>>
Thanks again,
Rick Cook
-- rcook@ntlug.org rcook@hex.net
This archive was generated by hypermail 2b28 : Wed Jan 17 2001 - 14:30:14 EST