[netatalk-admins] Network/Zone mixup ?

Subject: [netatalk-admins] Network/Zone mixup ?
From: Michael Zuelsdorff (micha@dolbyco.han.de)
Date: Tue Oct 06 1998 - 17:17:56 EDT

• Next message: Craig Roberts: "[netatalk-admins] netatalk on RHL 5.1"
• Previous message: Bob Atkins: "Re: [netatalk-admins] dsi_getsess: Interrupted system call"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hello,

I`m very satisfied with netatalk, but there is something I donīt understand:
When my atalkd.conf looks like

eth0 -seed -phase 2 -net 66-67 -addr 66.150 -zone "Ethernet_1"
eth1 -seed -phase 2 -net 68-69 -addr 68.150 -zone "Ethernet_2"
 
I get:

dolbyco:/usr/local/atalk-1006/etc # ../bin/nbplkup "@Ethernet_1"
                       HPLJ_4MP:LaserWriter 68.150:133
                     STYLUS_LOW:LaserWriter 68.150:129
                        dolbyco:TimeLord 68.150:132
                        dolbyco:AFPServer 68.150:130
                    STYLUS_HIGH:LaserWriter 68.150:128
                        dolbyco:netatalk 68.150:4
                        dolbyco:Workstation 68.150:4
dolbyco:/usr/local/atalk-1006/etc # ../bin/nbplkup "@Ethernet_2"
                      mac-micha: Macintosh 69.1:253
                      mac-micha:Workstation 69.1:4
 -----------------------------------------------------
When my atalkd.conf looks like

eth1 -seed -phase 2 -net 68-69 -addr 68.150 -zone "Ethernet_2"
eth0 -seed -phase 2 -net 66-67 -addr 66.150 -zone "Ethernet_1"

I get:

dolbyco:/usr/local/atalk-1006/etc # ../bin/nbplkup "@Ethernet_1"
                                                   (nothing !)
dolbyco:/usr/local/atalk-1006/etc # ../bin/nbplkup "@Ethernet_2"
                       HPLJ_4MP:LaserWriter 66.150:131
                     STYLUS_LOW:LaserWriter 66.150:129
                        dolbyco:TimeLord 66.150:132
                        dolbyco:AFPServer 66.150:130
                    STYLUS_HIGH:LaserWriter 66.150:128
                        dolbyco:netatalk 66.150:4
                        dolbyco:Workstation 66.150:4
                      mac-micha: Macintosh 69.1:253
                      mac-micha:Workstation 69.1:4
-------------------------------------------------------

I do expect my server to appear either in Ethernet_1 with 66.x:x
or in Ethernet_2 with 68.x:x !
Since the Mac is connected to eth1, I can accept the 69.x:x

BTW: Running Interpoll on the Mac confirms the output of nbplkup.
ifconfig in both cases looks the same:

eth0 Link encap:10Mbps Ethernet HWaddr 00:00:C0:E4:0E:BF
          inet addr:192.168.100.84 Bcast:192.168.100.95 Mask:255.255.255.224
          EtherTalk Phase 2 addr:66/150
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

eth1 Link encap:10Mbps Ethernet HWaddr 00:00:C0:04:09:5C
          inet addr:192.168.100.33 Bcast:192.168.100.63 Mask:255.255.255.224
          EtherTalk Phase 2 addr:68/150
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
 
This is pre-asun2.1.0-10a on Linux 2.0.33, but Iīm watching this strangeness
from the early days of netatalk.

Maybe all above isnīt wrong at all ?!? I hope, someone can explain..

Best regards.

Michael

• Next message: Craig Roberts: "[netatalk-admins] netatalk on RHL 5.1"
• Previous message: Bob Atkins: "Re: [netatalk-admins] dsi_getsess: Interrupted system call"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b28 : Sat Dec 18 1999 - 16:33:24 EST