Subject: Re: [netatalk-admins] please help getting netatalk to work!
From: System Administrator (admin@intergrafix.net)
Date: Tue Jan 27 1998 - 17:29:20 EST
>
> Are there any other AppleTalk routers on your network?
any OTHER? if you consider the linux box a router, then no, no others.
our cisco 2501 router doesn't have any appletalk on it. (both the linux
server and mac plug into the ethernet switch, so the cisco is out of the
picture)
> shut down every mac on the network
there's only 1 mac btw.
> set seed information in atalkd.conf (choose a suitable zone name and a
> network range of something like 10-20)
where do i get a zone name?? do i have to make one somewhere? if so,
where?
-Cygnus
---------------------------------------------------------------------------
Anthony J. Biacco Network Administrator/Engineer
.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-.
"The only way to predict the future, is to invent it."
.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-.
admin@intergrafix.net cygnus@ncohafmuta.com
http://cygnus.ncohafmuta.com/
---------------------------------------------------------------------------
>
> On Tue, 27 Jan 1998, System Administrator wrote:
>
> > Hi,
> >
> > I'm trying desperatly to get netatalk to work so a mac workstation can
> > access our linux webserver (cygnus.intergrafix.net) files. However, it is
> > being very difficult. I have tried both the .rpm and .tar.gz versions of
> > netatalk with the same results on bootup. I'll try to give you as much
> > detail as possible.
> >
> > If i let atalkd make my atalkd.conf, on bootup I get:
> > starting appletalk daemons:Net (0) not in net-range (65280-65534)
> > atalkdbind: Cannot assign requested address
> > bind: Cannot assign requested address
> >
> > And in /var/log/messages:
> > papd[648]: restart (1.4b2)
> > afpd[650]: main: atp_open: Cannot assign requested address
> >
> > If I put nothing in the atalkd.conf, on bootup I get:
> > starting appletalk daemons: atalkd,
> > nbp_rgstr: Connection timed out
> > Can't register cygnus:Workstation@*
> > nbp_rgstr: Connection timed out
> > Can't register cygnus:netatalk@*
> > nbprgstr papd afpd
> >
> > And in /var/log/messages:
> > atalkd[660]: restart (1.4b2)
> > atalkd[660]: zip_getnetinfo for eth0
> > last message repeated 2 times
> > atalkd[660]: as_timer multiple interfaces, no seed
> > atalkd[660]: as_timer can't configure eth0
> > atalkd[660]: as_timer waiting for router
> > atalkd[660]: ready 0/0/0
> > papd[672]: restart (1.4b2)
> > afpd[674]: Can't register cygnus:AFPServer@*
> >
> > Then my ethernet card (onboard Intel EtherExpress Pro 100) goes nuts with
> > eth0: Tx timeout: Transmit timed out
> > eth0: Trying to restart the transmitter...
> >
> > My ethernet is on eth0 and i'm using ip aliasing for virtual domains, so i
> > have eth0:1 eth0:2 eth0:3, etc..
> >
> > 'ifconfig eth0' reports
> > eth0 Link encap: 10Mbps Ethernet HWaddr 00:A0:C9:60:50:0A
> > inet addr: 206.245.154.68 Bcast:206.245.154.127 Mask:255.255.255.192
> > EtherTalk Phase 2 addr:65280/160
> > UP BROADCAST RUNNING MULTICAST MTU: 1500 Metric: 1
> >
> > RX packets: etc, etc..
> > TX packets: etc, etc..
> > Interrupt: etc, etc..
> >
> > PLEASE help if possible. Thanx.
> >
> > -Cygnus
> > ---------------------------------------------------------------------------
> > Anthony J. Biacco Network Administrator/Engineer
> > .-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-.
> > "The only way to predict the future, is to invent it."
> > .-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-.
> > admin@intergrafix.net cygnus@ncohafmuta.com
> > http://cygnus.ncohafmuta.com/
> > ---------------------------------------------------------------------------
> >
>
> --
> Alistair Riddell - BOFH
> IT Support Department, George Watson's College, Edinburgh
> Tel: +44 131 447 7931 Ext 176 Fax: +44 131 452 8594
>
This archive was generated by hypermail 2b28 : Sat Dec 18 1999 - 16:30:34 EST