Subject: Re: [netatalk-admins] YIKES!! SMC doesn't work with netatalk...
From: TheJEsTR@thejestr.rutgers.edu
Date: Mon Nov 03 1997 - 18:35:03 EST
Hello, I'm running Redhat 4.2 w/ netatalk 1.4b2 rpm installed.
Does Netatalk _not_ work with the tulip driver?? I am using the
driver and running netware emulation and samba and obviously tcp/ip.
All seem to be working just fine but netatalk does not find any
other zones on nbplkup. times out 'atp_rresp: Connection timed out'
on getzones and /var/log/messages says: atalkd[268]: config for no
router and I know there are several Apple talk routers on our
network. if i just put the interface in /etc/atalkd.conf:
eth0
it returns random addresses. Latest is:
eth0 -phase 2 -net 0-65534 -addr 6644.244
I have edited the /etc/atalkd.conf trying:
eth0 -phase 2 -net 0-65534 -zone
"CAC-Communication-AlexanderJohnston"
"CAC...." is an existing zone that has 2 servers in my building it
it. I have tried no atalkd.conf file which again returns
random addresses in the atalkd.conf file and doesnt find a router.
I have tried changing the /etc/rc.d/init.d/atalk.init file to:
ATALK_NAME=@CAC-Communication-AlexanderJohnston and that yeilds a
cannot register error. I have not been very successful in finding a
lot of documentation on Netatalk so I figured I'd ask. I've been
working on this all day today and I'm a bit tired. If I left out any
useful info required to assist me please let me know.
Thank you.
This archive was generated by hypermail 2b28 : Sat Dec 18 1999 - 16:27:56 EST