Subject: [netatalk-admins] Routing Problems between LocalTalk and EtherTalk
From: Patrik Schindler (poc@poc.pingnet.de)
Date: Fri Oct 10 1997 - 05:52:41 EDT
Hi, out there!
Bradford W. Johnson, the holy keeper of the one and only driver for a LocalTalk ISA Card couldn't fix this Problem, I now have. Will this Problem be fixed in 2.0.31? I'm now running 2.0.29 and won't move to 30 because of some ISDN difficulties.
leela:/root # cat /usr/local/etc/atalkd.conf
eth0 -seed -phase 2 -net 13-20 -addr 19.1 -zone "Ether"
ltalk0 -seed -phase 1 -net 21 -addr 21.1 -zone "Local"
leela:/root # nbplkup
leela:AFPServer 21.1:130
Nullprinter:LaserWriter 21.1:128
leela:netatalk 21.1:4
leela:Workstation 21.1:4
Powermac:Power Macintosh 7100/66 15.224:253
Powermac:Arbeitsplatz 15.224:4
Performa 630: Macintosh 19.22:253
Performa 630:Arbeitsplatz 19.22:4
leela:/root # cat /proc/net/atalk_iface
Interface Address Networks Status
ltalk0 0015:01 0015-0015 0
eth0 0013:01 000D-0014 0
lo 0000:00 0000-0000 0
leela:/root # cat /proc/net/atalk_route
Target Router Flags Dev
0015:01 0000:00 5 lo
0015:00 0015:01 1 ltalk0
0013:01 0000:00 5 lo
0014:00 0013:01 1 eth0
0013:00 0013:01 1 eth0
0012:00 0013:01 1 eth0
0011:00 0013:01 1 eth0
0010:00 0013:01 1 eth0
000F:00 0013:01 1 eth0
000E:00 0013:01 1 eth0
000D:00 0013:01 1 eth0
0000:00 0000:00 5 lo
I can see all devices from the view of leela. Nullprinter is -as you can see by the address- a printqueue on leela. I've tested to connect to the SE/30 with FileSharing, but my Powermac says "no answer from the fileserver". I tried to print from Powermac, but I get errors "the printer could not be found" or similar. Connecting to leela from SE/30 works *very* fine and without any errors! On the other hand, I cannot see Powermac or any other devices on Ethernet from LocalTalk. It seems as if there's a "backward route" missing.
I hope, I haven't forgot any detail you may need.
Can anyone help?
:wq! PoC
This archive was generated by hypermail 2b28 : Sat Dec 18 1999 - 16:26:56 EST