Subject: Re: [netatalk-admins] Problem w. Netatalk in a Ethershare Environment
From: Stefan Bethke (stefan@promo.de)
Date: Wed Sep 03 1997 - 07:52:57 EDT
At 20:11 Uhr +0200 03.09.1997, Fuldaer Verlagsanstalt wrote:
>Aug 29 16:44:53 gr-router atalkd[206]: rtmp_packet gateway 400.140 up
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>The actual atalkd.conf:
>eth1 -seed -phase 2 -net 398-399 -addr 398.41 -zone "Buero"
>eth2 -seed -phase 2 -net 396-397 -addr 396.220 -zone "Buero"
>eth0 -seed -phase 2 -net 400-410 -addr 400.5 -zone "Satz"
Most probably, EtherShare's configuration is different. The configuration
(in conf/atalk.conf) should look like
atalkd: if="le0:400-410:140:Satz", if=... [further interfaces]
If there is only one interface listed, this would be the culprit as the
only valid configuration then would be
atalkd: if="le0"
Double-check that the net range and the zone list are *exactly* identical
for the common network. I've had no problems running EtherShare and
netatalk, both as a router and a non-router, albeit on FreeBSD, not Linux.
You might consider talking to your Helios dealer, or ask your system
administrator about the AppleTalk configuration at your site.
Stefan
-- Stefan Bethke Promo Datentechnik | Tel. +49-40-851744-0 + Systemberatung GmbH | Fax. +49-40-851744-44 Eduardstrasse 46-48 | e-mail: stefan@Promo.DE D-20257 Hamburg | http://www.Promo.DE/
This archive was generated by hypermail 2b28 : Sat Dec 18 1999 - 16:26:35 EST