Subject: Re: [netatalk-admins] Samba, Netatalk, & LW II NT
From: Andrew Solmssen (solmssen@ca.metsci.com)
Date: Fri Aug 29 1997 - 19:24:46 EDT
It's fairly simple - as below:
bitboy-lw:\
:sd=/var/spool/lpd/bitboy-lw:\
:lp=/var/spool/lpd/bitboy-lw/null:\
:mx#0:\
:sh:\
:if=/usr/local/atalk/etc/filters/ifpap:\
:of=/usr/local/atalk/etc/filters/ofpap:
Also - I had no problems printing directly from the linux machine - it was
only going from a Win95 machine via a samba printer share to the linux box
to the printer that I get this error.
TIA...
---- Andrew
On Fri, 29 Aug 1997, Aaron M. Gowatch wrote:
> On Fri, 29 Aug 1997, Andrew Solmssen wrote:
>
> > PPro 200 running Red Hat 4.2, Samba 1.9.16p11, and netatalk 1.4b2.
> > LaserWriter II NT connected via Dayna EtherPrint.
> > Windows 95B workstation.
> >
> > The LWII is in /etc/printcap and uses pap/psf. It works fine from the
> > Linux box. Samba exports the printer and I can connect to the share from
> > my Win95 machine. I set up the priter as a LWIINT, and I can print fine,
> > except that the burst page causes a postscript exception and prints an
> > error. This doesn't happen from the Linux machine. I also don't seem to be
> > able to turn off the burst page - i.e. an "sh" in the printcap does
> > nothing.
>
> I had similar problems using a LaserWriter 16/600 PS. For some reason,
> the printer would throw an error when I used something like ofpaprev as
> opposed to ofpap.
>
> What does an entry in your /etc/printcap looks like?
>
> Aa.
>
>
This archive was generated by hypermail 2b28 : Sat Dec 18 1999 - 16:26:33 EST