Subject: Re: Phase Routing
From: wesley.craig@umich.edu
Date: Thu Jun 23 1994 - 11:27:28 EDT
> From: jl@rowett.scot-agric-res-inst.ac.uk (Jim Lomax)
> According to FAQ from terminator 1.3 does (yup) do phase 1 and 2 "and
> route between them on the same interface".
> Can someone tell me how this is set up, please.
Sure. Try this:
le0 -phase 2
le0 -phase 1
Since the phase 1 and phase 2 interfaces "count" as different
interfaces, having both of these lines will turn routing on. If you
don't have another router on the net to supply the netranges and zones,
you'll need to supply them above, after the -phase {1|2}.
:wes
This archive was generated by hypermail 2b28 : Sat Dec 18 1999 - 16:20:56 EST